











Stainless steel sheet surface is smooth, has higher plasticity, toughness and mechanical strength, acid, alkaline gas, solution and other media corrosion. A stainless steel sheet is an alloy steel that does not rust easily, but is not absolutely rust free. Stainless steel is a group of iron-based alloys that contain a minimum of approximately 11% chromium, a composition that prevents the iron from rusting and also provides heat-resistant properties. Different types of stainless steel include the elements carbon (from 0.03% to greater than 1.00%), nitrogen, aluminum, silicon, sulfur, titanium, nickel, copper, selenium, niobium, and molybdenum. Specific types of stainless steel are often designated by a three-digit number.
Here is the content list:
What are the applications of stainless steel sheets?
How to choose the right stainless steel sheet?
How to identify your stainless steel is real or not?
Because of their relatively attractive appearance, stainless steel sheets are used for both decorative and structural purposes. They can be laid over a wood base to create a countertop or table, and are also a popular finish for kitchen backsplashes. Many appliances and machines are made using a stainless steel sheet casing, as are many cars and airplane bodies. Metalworkers use these sheets to create artwork and architectural elements, while electronics manufacturers rely on stainless steel sheets when building equipment casing and some operating components.
1. Before choosing stainless steel sheets, the use and environment of stainless steel sheets should be considered. For example, welded pipes are usually used for decoration, seamless pipes are usually used for fluid transportation, sanitary stainless steel sheets are used for medical treatment or kitchens, and thick-walled pipes are used for pressure. Generally, 200 series materials are sufficient indoors, 304 stainless steel sheets are sufficient outdoors, and 316 materials or above are usually used in acid-base places or coastal areas.
2. When purchasing stainless steel sheets, high-quality products assessed by the Bureau of Quality and Technical Supervision shall be selected. Long-term use of witnesses and good customer reputation are the most direct and effective purchase methods.
Many daily necessities and facilities made of 3004 stainless steel are used in our daily life, such as 304 stainless steel water tanks, stainless steel sinks, etc. These 304 stainless steel products greatly facilitate people’s lives, but people will also encounter them in their lives. To some merchants who use fake 304 stainless steel plates or non-304 stainless steel plates to mislead consumers with fake 304 stainless steel plates or non-304 stainless steel plates, which has brought immeasurable losses to consumers.
Learn more about stainless steel sheets can know the applications of stainless steel sheets and how to choose the right stainless steel sheets. If you want to buy good stainless steel sheets at a reasonable price, Jiangsu C.J.M. Stainless Steel Group is your best choice. Whether from quality or price, or delivery time, we can help customers to open up a further and larger market. We have all types of stainless steel sheets, if you have any questions, you can contact us or search us online.
There are many products made of stainless steel in our daily life due to its many advantages, such as durability, corrosion resistance and high hardness. It has a wide range of applications, mainly used in heavy industry, light industry, household goods industry and building decoration and other industries. This article will take stock of the advantages of stainless steel and some of the common types, and provide a brief analysis of stainless steel materials.
·Advantages of stainless steel
·What is the difference between 304 stainless steel and 316 stainless steel?
·How to select stainless steel?
The physical properties of stainless steel are very superior. In terms of physical properties, stainless steel is heat resistant, high temperature resistant, also low temperature resistant and even ultra-low temperature resistant. In terms of chemical properties, stainless steel chemical corrosion resistance and electrochemical corrosion performance in the steel is the best, second only to titanium alloy. With the continuous development of the national economy, the application of stainless steel coils is becoming more and more widespread. Whether it is durability or aesthetics, stainless steel has excellent performance.
Different prices
Due to the addition of molybdenum and nickel in 316, 316 stainless steel is more expensive than 304 stainless steel.
Different maintenance methods
304 has better corrosion resistance, oxidation resistance and workability than 316 stainless steel. This is because some 316 stainless steel products are made with 10% nickel to make the stainless steel more durable and resistant to corrosion.
304 and 316 is the code name for stainless steel, essentially they are no difference is stainless steel, but the types of stainless steel by a lot, different kinds of stainless steel has different application scenarios. Generally speaking, 304 stainless steel is widely used for curtain walls, sidewalls, roofing and other architectural applications, but in highly aggressive industrial or marine atmospheres, 316 stainless steel is preferable.
The conditions of use of stainless steel components, including corrosive media composition, temperature, pressure, state of stress, life expectancy, etc., is a prerequisite for the selection of applicable stainless steel. Adequate understanding of the conditions of use of the components is the primary condition necessary for the rational selection of stainless steel. We recommend that you have a comprehensive understanding of the properties of stainless steel, the environmental factors limiting its use, and the ease of purchase before purchasing stainless steel, so that you can make a targeted choice.
With the information above, do you have a better understanding of Stainless Steel Coil, a product with a wide range of applications? Jiangsu C.J.M. Stainless Steel Group is a supplier and distributor of stainless steel, nickel, steel, aluminium, titanium, brass and bronze with world class production and quality control. Our products are mainly used in the power, construction, medical, chemical equipment, petrochemical equipment and heat exchange industries. We have strict quality control over any of our products and we strive to give you the best product experience.
Generally speaking, there are several types of stainless steel, such as 316L, stainless steel, 316L, and so on considering anti-corrosion treatment or other materials.
Here is the content:
The service life of 304 stainless steel plate
The service life of other stainless steel plates
The service life of color stainless steel plate
For 304 stainless steel plate, the Ni element in its composition is very important, which directly determines the corrosion resistance of 304 stainless steel plate and its value.
The most important elements in the 304 stainless steel plate are Ni and Cr, but they are not limited to these two elements. The specific requirements are stipulated by the product standard. Industry common judgment that as long as the Ni content is greater than 8%, Cr content is greater than 18%, it can be considered as 304 stainless steel. This is why the industry calls this type of stainless steel 18 / 8 stainless steel. In fact, the relevant product standards have very clear provisions for 304, and these product standards have some differences for different shapes of stainless steel.
According to China's (national gas stove safety management regulations), the artificial gas stove will be scrapped after 6 years of use. Oil and gas cookers will be scrapped after 8 years of use. When it is used beyond the limit, the parts have been seriously aged and deformed, and there is no flameout protection device. It is very easy to cause backfire, flameout, gas leakage and all kinds of serious accidents. The above is our country's standard, but according to the international standard for the service life of commonly used household appliances, the gas stove is 16 years.
Everyone's situation is different, and the time used is also different. If it's well preserved, it's OK to use it for two or three years. 316 acid resistant stainless steel plate can be used for many years.
Stainless steel tableware is best not to put vinegar and salt, will dissolve the toxin.
Generally speaking, the main reason for measuring the service life of color stainless steel plate depends on the plating time of the manufacturer on the bottom plate. In theory, the longer the plating time of stainless steel plate is, the higher the corrosion resistance of the plate is. However, because the cost of stainless steel plate manufacturer is that the plating time is generally controlled at 15-30 minutes, and the plating time is set at about 10 minutes, the service life of the whole color stainless steel plate is significantly shortened.
The length of electroplating time is one of them, and the second is the material of the bottom plate. 304 stainless steel plate can be used in most environments, with high-quality corrosion resistance and heat resistance, but some manufacturers use 201 to save costs. Stainless steel plate is used as the bottom plate. After electroplating through the electroplating process, it has no difference with the naked eye, but time will prove it. As time goes on, it will rust on the white spots of the colored stainless steel plate.
In addition to the above two factors, the conditions in the process of use are also the main reasons affecting the service life of the color stainless steel plate. For example, the service environment is bad and there is no need for timely maintenance. In these cases, the service life of the color stainless steel plate can be used within a few years. Not too bad. Under normal circumstances, it should be able to prevent it from fading for 10 years. As long as you clean it with detergent, you can say that high quality color stainless steel plate will be no problem in 10 years.
Choose our stainless steel, let your life not rust! The Jiangsu C.J.M Stainless Steel Group’s stainless steel products, excellent manufacturing processes, products after the fine screening, quality assurance, and long service life, no longer worry about the use of stainless steel plate time and replacement problems. Tel. + 86-18092577236, post office postmaster@ssplatechina.com.
The material model of the water cup liner refers to 304 stainless steel, which is fully known as austenitic stainless steel. 304 stainless steel is food grade stainless steel approved by the state, and is commonly used in stainless steel tableware. 304 stainless steel is a stainless-steel brand manufactured according to ASTM standard of the United States. 304 stainless steel has good corrosion resistance and heat resistance, and is widely used in tableware, water cup and other daily necessities.
In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 18% chromium and more than 8% nickel. As a result, most cups are marked with 304, but illegal vendors cheat consumers.
316 stainless steel is better! 304 and 316 are austenitic stainless steel, with content of 16-18%. The difference is that the molybdenum content of 316 stainless steel is 2% higher, so the corrosion resistance of 316 stainless steel is better than 304 stainless steel, especially chlorine corrosion resistance.
In addition, the average nickel content of 304 stainless steel is 9%, while that of 316 stainless steel is 12%. Nickel in metal materials can improve the high temperature durability, mechanical properties and oxidation resistance of materials. Therefore, the content of materials directly affects the comprehensive properties of materials.
Cold rolled 304 stainless steel is a very common stainless steel with a density of 7.93g/cm3, also known as 18 / 8 stainless steel. Its metal products have the characteristics of high temperature resistance and good processing performance, and are widely used in industry, food, medical and other industries.
The most important elements in 304 are nickel and chromium, but they are not limited to these two elements. Specific requirements are determined by product standards. According to the general judgment in industry, as long as the nickel content is more than 8%, the chromium content is more than 18%, it can be regarded as 304 stainless steel.
304 stainless steel is the most widely used Cr Ni stainless steel. It has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, stamping, bending and other hot working properties, without heat treatment hardening phenomenon (service temperature - 196 ℃ - 800 ℃). It is resistant to atmospheric corrosion. If it is industrial atmosphere or seriously polluted area, it needs to be cleaned in time to avoid corrosion.
CONTACT US
Jiangsu C.J.M. Stainless Steel Group is a supplier and distributor of stainless steel, nickel, steel, aluminum, titanium, brass and bronze with world class production and quality control.
+86-18092577236
info@stainless-steel-china.com
Echo