Availability: | |
---|---|
Quantity: | |
Type: 201, 202, 304, 304L, 309S, 310S, 310H , 314 ,316, 316L, 316Ti, 317, 317L, 347, 347H , 321, 403 , 405 ,409, 409L, 410 , 410L , 420, 429 , 430, 434 ,444, 904L , 2014 and 2205 ,Uranus 65 ,C126
Martensite-Ferritic: Ss 405 , 409, 409L, 410, 420, 420J1 , 420J2 , 420F , 430 ,431 sheet / plate;
Austenite Cr-Ni -Mn: Ss 201 sheet, ss 202 sheet, J4 ss coil;
Austenite Cr-Ni: SS 304 sheet, SS 304L sheet, ss 309S sheet, ss 310S plate;
Austenite Cr-Ni -Mo: Stainless steel 316 plate, stainless steel 316L plate;
Super Austenitic: 904L Stainless steel sheet , 2205 stainless steel sheet ,253MA stainless steel plate 254SMO stainless steel plate , 654MO stainless steel Plate,
Duplex : S32304 , S32550 ,S31803 ,S32750
EN Standard:
Austenitic: 1.4372 ,1.4373, 1.4310, 1.4305, 1.4301, 1.4306 , 1.4318 ,1.4335, 1.4833 , 1.4835 , 1.4845, 1.4841, 1.4401 , 1.4404 , 1.4571 ,1.4438, 1.4541 , 1.4878 , 1.4550 , 1.4539 , 1.4563 , 1.4547
Duplex: 1.4462 , 1.4362 ,1.4410 , 1.4507
Ferritic :1.4512, 1.400 , 1.4016 ,1.4113 , 1.4510 ,1.4512, 1.4526 ,1.4521 , 1.4530 , 1.4749 ,1.4057;
Martensitic: 1.4006 , 1.4021 ,1.4418 ,S165M ,S135M;
Type 201 Cold Rolled Steel Sheet Spec | |||
Finish | Thickness | Characteristics | Applications |
No. 1 | 3.0mm~50.0mm | Finished by hot-rolling, annealing and pickling, characterized | Chemical industry equipment, Industrial tanks |
No. 2B | 0.3mm~6.0mm | Finished by heat treatment, pickling after cold rolling, followed | General Application Medical Instruments,Tableware |
No. BA | 0.5mm~2.0mm | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware,architectural purpose |
No. 4 | 0.4mm~3.0mm | Polishing with No. 150 to No.180 mesh abrasivesThe most | Milk & Food processing acilities, Hospital Equipment, |
No. 8 | 0.5mm~2.0mm | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
HL(Hair Line) | 0.4mm~3.0mm | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware |
Grade | Chemical Composition (%) | |||||||
C | Si | Mn | P | S | Ni | Cr | Cu | |
201 Full DDQ | 0.084 | 0.361 | 10.095 | 0.0434 | 0.0099 | 1.003 | 14.129 | 1.406 |
201 Half DDQ | 0.108 | 0.429 | 11.187 | 0.0348 | 0.0037 | 1.217 | 13.001 | 0.56 |
202 | 0.057 | 0.45 | 7.91 | 0.039 | 0.002 | 4.08 | 14.94 | -------- |
SUS304 | 0.50 | 0.51 | 1.13 | 0.028 | 0.001 | 8.12 | 18.27 | -------- |
410 | 0.03 | 0.30 | 0.25 | 0.022 | 0.002 | 0.06 | 11.99 | -------- |
SUS430 | 0.034 | 0.345 | 0.268 | 0.0162 | 0.0031 | 0.106 | 16.05 | 0.014 |
we use type 201 stainless steel that has been formed and drawn. Type 201 has a high work-hardening rate that often requires intermediate annealing. It can be welded, however, by all standard methods used for higher (18%) Chromium and (8%) Nickel stainless steels.
content is empty!
CONTACT US
C.J.M. Stainless Steel Group Ltd is a supplier and distributor of stainless steel, nickel, steel, aluminum, titanium, brass and bronze with world class production and quality control.
+86-15229077020
Tina