Availability: | |
---|---|
Quantity: | |
Also, the industrial norms are taken into consideration while manufacturing of the product.
ASTM A240 / ASME SA240
Length
2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm.
Width
1000mm / 1219mm /1250mm / 1500mm / 2000mm
Thickness
Ranging from 0.3mm to 20mm
Hardness
As per ASME A & NACE MR 175
Finish
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
C | 0.15 |
Si | 0.50 |
Mn | 1.00 |
P | 0.040 |
S | 0.030 |
Cr | 11.5-13.0 |
Mo | - |
Ni | - |
Others | - |
#1 Finish | Hot rolled, annealed and pickled. |
#2D Finish | A uniform, dull silver gray mill finish that is applied to thinner stainless steel coils,the thickness of which has been reduced by cold rolling. |
#2B Finish | A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line. |
#3 Finish | A semi polished surface achieved by finishing with the equivalent of a 80 to 120 grit abrasive. This finish has a pronounced grit line. |
#4 Finish | Also called brushed, directional or satin finish. A is characterized by fine polishing grit lines that are uniform and directional in appearance. The final abrasive used in the process is 150 to 220 grit. |
#4 Satin Brush Finish | 150 to 180 grit finish A fine directional polish, typically used in the washroom accessories industry. Most 3.5″ floppy diskette cover plates have this finish. |
#6 Finish | Polished finish achieved with the equivalent of a 240 grit abrasive. Finer grit lines and higher reflectivity than a No. 4 finish. |
#7 Finish | Highly reflective surface obtained with the equivalent of a 320 grit abrasive. Minimal grit lines. |
No. 8 or True #8 mirror | This is the most reflective mirror finish on the market. All of the polishing, or “grit,” lines from the preliminary polishing operations are removed. The look is that of a glass mirror. Sometimes referred to as a non directional mirror finish, Super 8, No. 9, Perfect No. 10, and even No. 12 mirror. |
CMP Super #8 mirror | Chemical Mechanical Polished Super #8 mirror finished sheets are guaranteed to be free from any manufacturing defects. This product represents the ultimate in mirror polished stainless steel. It is available as a single-sided or double-sided mirror polished sheet. |
Hairline finish | 80 – 140 grit finish A well defined directional polish. Starting base substrate is a No. 4 finish sheet; these sheets are polished to provide a “continuous long grain” hairline look. A finish which is popular with architects for its aesthetic, it is equally popular with fabricators due to it’s ease of fabrication and finish matching properties after welding operations. |
CONTACT US
C.J.M. Stainless Steel Group Ltd is a supplier and distributor of stainless steel, nickel, steel, aluminum, titanium, brass and bronze with world class production and quality control.
+86-15229077020
Tina