Type 2205 Weldable Roof Cold Rolled Steel Sheet

Material

Duplex 2205 Sheet & Duplex 2205 Plate

Specification

ASTM A240 / ASME SA240

Standard Sizes

1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm

Tolerances of Width and thickness

EN 10151 Duplex 2205 strip for springs

EN 10088 Duplex 2205 strip (general)

EN 10258 (formerly DIN 59381)

Width

10-2500mm

SA-240 Duplex 2205 Plate & Sheet Thickness

0.1mm to 100 mm Thk

SA 240 Type 2205 Plate & Sheet Length

2m, 2.44m, 3m, or as required

SA 240 GR 2205 Plate & Sheet Finish

2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Cold rolled sheet (CR), Hot rolled plate (HR), No.1 finish hot rolled 2205 Duplex Plate, 2B, 1D, BA, No.4, 8K, hairline, satin, brush, mirror etc.

SA 240 TP 2205 Plate & Sheet Hardness

Quarter Hard, Half Hard,Spring Hard, Soft, Hard, Duplex 2205 Sheet suppliers

Stock available in form of

Shim Sheet, Rolls, Strip, Flats, Clad Plate, Plain Sheet, Plate, Sheet, Coils, Foils, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Blank (Circle), soft annealed, sheared, annealed, tread plate,descaled, Checker Plate

Profiling

To provide a full profiling service in China we use numerous profiling methods including:

Plasma Plate Cutting

Laser Plate Cutting

Oxy-propane Flame Cutting

Avesta 2205 Plate & Sheet Manufacturers

  BAOSTEEL, TISCO, JISCO, LISCO, POSCO, ZPSS

Plasma profiles

As per customer's drawings

Value added services for Duplex 2205 Sheet & Plate

Plasma cutting, Waterjet cutting, Bending and mechanical processing, Laser cutting, welding, edge preparation, sawing and shearing.

Value added services for Duplex 2205 Coil

Slitting

Cut-to-length

Blanking 

Polishing

Why choose Metal ?

The third party inspection is accepted.

Mill Test Certificate is supplied with shipment.

Free sample is available. (Yes, we could offer the sample for free charge but do not pay the cost of freight.)

Minimum Nitrogen content and Ferrite Count Test

Tested to ASTM A923 Method "C" or ASTM G48 Method "A".

Specialized in

ASTM A240 Type Duplex 2205 Clad plate: ASTM A240 Type Duplex 2205 Clad plate is a composite steel plate made by bonding ASTM A240 Type Duplex 2205 plate, etc.

ASTM A240 Type Duplex 2205 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width;

ASTM A240 Type Duplex 2205 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width.

ASTM A240 Type Duplex 2205 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width;

Delivery time

Generally it is 7-10 days if the Duplex 2205 Sheet & Plate are in stock. or it is 15-20 days if the Duplex 2205 Plate & Sheet are not in stock, it depends to quantity.

22.0-23.0

4.50-6.50

3.00-3.50

.030 Max

0.14-0.20

2.00 Max

1.00 Max

.030 Max

.020 Max

Balance

1 – Duplex 2205 Hot rolled, heat treated, pickled Plate & Sheet

.1000 – .3750

max. 72

2R – Duplex 2205 Cold-rolled, bright-annealed Sheet & Plate

 0.002–0.06

 0.118–25.551

2H – Duplex 2205 Work hardened Plate & Sheet

 0.002–0.06

 0.118–24.803

2B – Duplex 2205 Cold rolled, heat treated, pickled, skin passed Sheet & Plate

10–24

max. 72*

2D – Duplex 2205 Cold rolled, heat treated, pickled Plate & Sheet

12–24

max. 60

BA Mexinox only

18–28

max. 48

Deco Rolled-On Mexinox only

14–28

max. 48

Duplex 2205 Polished Plate & Sheet (not brushed)

11–24

max. 60

Temper rolled Mexinox only

13–29

max. 48