86-15229077020
English
 |
| Quantity: | |
|---|---|
317
TISCO, POSCO, BAOSTEEL, JISCO LISCO
7219132900
Type 317 Cold Rolled Steel Sheet are classified according to the use of processing methods: steels for pressure processing and steels for cutting; and classified according to the characteristics of the organization: austenitic, austenitic-ferritic, ferritic, martensitic, and precipitation hardening.
Description | ASTM A240 / ASME SA240 Stainless Steel Plates, ASTM A240 Hot Rolled Stainless Steel Plates |
Standard | ASTM, ASME, BS, DIN, EN |
Material | 310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L, |
302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc | |
Specification | Cold rolled: 1219mm * 2438mm (4′ x 8′), 1219mm * 3048mm (4′ x 10′), 1220mm * 2440mm, 1250mm * 2500mm or as your requirement. Hot rolled: 1500mm * 2000mm, 1000mm * 3000mm, 1500mm * 4000mm, 1500m * 6000mm or as your requiremnt. |
Technique | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Form | Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Etc. |
Surface | 2B, 2D, BA, NO. 1, NO. 4, NO.8, 8K, Mirror, Checkered, Embossed, Hair Line, Sand Blast, Brush, Etching |
Thickness | 0.25-200mm, 0.3mm to 120mm |
Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm |
Package | Standard Export Seaworthy Package, or as required. |
Value Added Services | Cladding,Heat Treatment,Annealed, Pickling, Polish,Rolling,Cutting,Bending,Forging,Minor Fabrication Etc. |
MTC | Mill Test Certificate, Available as per EN 10204 3.1 |
C：≤0.08
Mn：≤2.00
Si：≤1.00
Cr：18.0~20.0
Ni：11.0~15.0
P：≤0.045
S：≤0.03
Mo：3.0~4.0
N：≤0.10
Standard : ASTM / ASME A240 / SA240
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
SS 317 | 1.4449 | S31700 | SUS 317 | - |
SS 317L | 1.4438 | S31703 | SUS 317L | X2CrNiMo18-15-4 |
